 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SSL40 Series EXTERNAL AC/DC POWER SUPPLIES * * * * * * 4.21 x 1.77 x 0.98 inch enclosure 40 W external power supply Molded UL94V-0 plastic enclosure Stand alone `listed' equipment Overvoltage and short circuit protection EN55022, EN55011, FCC conducted and radiated emissions level B * UL, CSA and VDE safety approvals * Available RoHS compliant Single output 40 W External AC/DC Power Supplies 1 The SSL40 series is a 40 W universal input ac-dc external power supply in a 4.21 x 1.77 x 0.98 inch plastic enclosure. The SSL40 is a low cost series with six single output models in a very small package providing a pre-approved external power solution for a host of worldwide low power portable and desktop applications. The SSL40 provides 40 W of output power with free air convection cooling. Standard features include universal input, overvoltage, short circuit protection and EN55022 conducted emissions level B. The series, with full international safety approval and the CE mark, provides pre-approved SELV outputs without the need for further safety approval or mechanical integration into the application system. The SSL40 series is designed for use in low power, portable and desktop data networking, computer and industrial applications requiring low cost external power adapters in a small package. All specifications are typical at nominal input, full load at 25 C unless otherwise stated 2 YEAR WARRANTY SPECIFICATIONS OUTPUT SPECIFICATIONS Line regulation Total regulation Overshoot/undershoot Transient response Single output (See Note 3) At turn on Main output 50% to 100% load step 0.5% 2.0% 1.0% 5.0% max. dev., 1ms recovery to 1.0% 0.02%/C, max. See table 135% to 175% of max. output power Continuous with auto-restart GENERAL SPECIFICATIONS Hold-up time Efficiency Isolation voltage Switching frequency Approvals and standards Case material Flammability rated Weight MTBF MIL-HDBK-217F 110 Vac @ 40 W 230 Vac @ 40 W 110 Vac @ 40 W Input/output Fixed Safety 5 ms 45 ms 83% typical 3000 Vac 100 kHz 10 kHz VDE0805, EN60950 IEC950, UL1950 CSA C22.2 No. 950 General Electric Lexan, black UL94V-0 200 g (7.06 oz) 150,000 hours min. Temperature coefficient Overvoltage protection Output power limit Short circuit protection INPUT SPECIFICATIONS Input voltage range Input frequency range Input current 90 Vac 220 Vac Universal input 90-264 Vac 47-440 Hz 1.00 Arms max. 0.52 Arms max. ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating temperature 0 C to +40 C full load, no derating Non-operating -40 C to +85 C 0 C to +40 C ambient, Full load convection cooled Peak (See Note 1) Non-condensing Operating Non-operating 5-500 Hz per MIL-STD-810E 5% to 95% RH 10,000 feet max. 30,000 feet max. 2.4 G rms 516.4 Part IV EMC CHARACTERISTICS Radiated emissions Conducted emissions EN55022/11, FCC part 15 EN55022/11, FCC part 15 Level B Level B Relative humidity Altitude Vibration (See Note 6) International Safety Standard Approvals geprufte Sicherhelt Shock VDE0805/EN60950/IEC950 License No. 104723G UL1950 File No. E136005 CSA C22.2 No. 950 File No. LR41062 File Name: ssl40.pdf Rev (02): 07 Nov 2005 SSL40 Series EXTERNAL AC/DC POWER SUPPLIES OUTPUT VOLTAGE +12 V +14 V +15 V +18 V +24 V +48 V Notes 1 Single output 40 W External AC/DC Power Supplies 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT CURRENTS RIPPLE MIN 0A 0A 0A 0A 0A 0A MAX 3.0 A 2.7 A 2.6 A 2.2 A 1.6 A 0.83 A PEAK (1) (2) OVP THRESHOLD 250 mV 250 mV 250 mV 250 mV 250 mV 250 mV Notes 5 6 7 8 (5) TOTAL REGULATION 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% (3) MODEL NUMBER (8,9) 3.5 A 3.2 A 3.0 A 2.6 A 1.9 A 1.0 A 15.0-18.0 V 16.5-19.5 V 17.5-21.0 V 22.0-25.5 V 29.0-34.2 V 55.0-64.0 V SSL40-7612J SSL40-7614J SSL40-7615J SSL40-7618J SSL40-7624J SSL40-7617J 2 3 4 Peak output current lasting less than 60 seconds with duty cycle less than 5.0%. During peak loading, output voltage may exceed total regulation limits. 20 MHz bandwidth, peak to peak, measured using a 12 inch twisted pair terminated with a 47 F electrolytic capacitor. Total regulation is defined as the static output regulation at 25 C, including initial tolerance, line voltage within stated limits, load currents within stated limits, and output voltages adjusted to their factory settings. To help maintain the power supply safety approvals, the IEC320/C7 input connector cable must be rated minimum 3.0 A and approved by an applicable safety agency for the intended country of use. National and international variations on mains plugs, adapters and customer preference to lead length prevents Artesyn from supplying an IEC320/C7 (or compatible) input connector cable. The IEC320/C7 input (or compatible) connector cable can be sourced locally, e.g. Newark, Qual Electronics, Radio Shack, etc. or other non affiliated distributors. 9 Output voltage protected by Zener diode. Three orthogonal axes random vibration, 10 minute test for each axis. IEC320/C8 type input connector. The `J' suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. PIN CONNECTIONS 2.5 MM JACK PLUG Inner Outer VA Return SWITCHCRAFT Power Jack, P/N 712A or equiv. 4.21 (107.00) 2.09 (53.00) 0.55 (14.00) 0.47 (12.00) 0.98 (25.00) 36.00 0.79 (914.00 20) 0.83 (21.00) 1.77 (45.00) 20) PHONE JACK 0.098 (2.500) ALL DIMENSIONS IN INCHES (mm) Datasheet (c) Artesyn Technologies(R) 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. www.artesyn.com File Name: ssl40.pdf Rev (02): 07 Nov 2005 |
Price & Availability of SSL40-7618J
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |